Motus M770EL Service Manual download pdf (Page 32)

4.7 Assembly G: Rear Wheels

4.7.1 Replacing the Tyres

For replacing the casing, inner tube, and rim band, please observe the information given in Sec-

tion 8 of the Instructions for Use.

INFORMATION

Replace the casing if it is bald or shows cracking or other damage.

4.7.2 Replacing the Push Rings and Setting the Mounting Position "narrow / wide"

Completely remove the tyre.

Loosen and remove the screw connection of the push rings with the rim.

Mount the push rings in the narrow or wide mounting position in relation to the rim (Fig 89).

For mounting the tyres, please refer to Section 8 of the Instructions for Use.

4.7.3 Setting the Quick-release Axle

The quick-release axle should be set so the wheel is correctly engaged, with no play on the axle.

Use a wrench to hold the quick-release axle on the inside, and adjust the play by turning the nut

on the end of the quick-release axle in or out (Fig. 90, see arrow).

Please also observe the information regarding maintenance, cleaning, and disinfection given in

Section 7 of the Instructions for Use.

1 2 ... 27 28 29 30 31 32 33 34 35 36 37 ... 43 44

No comments

Motus M770EL Service Manual Page 32