Motus M770EL Service Manual download pdf (Page 15)

4.2 Assembly B: Footrest

INFORMATION

Use new screws coated with thread lock or apply a liquid thread lock to the existing screws.

4.2.1 Replacing the Footrest Holder

Insert the footrest holders – in laterally turned position – from above into the front frame tubes

(Fig. 26).

Turn the footrest holders to the front until the swivel segment engages with the lock. For disas-

sembly, please proceed in reverse order.

For adjusting the lower leg length and for operation, please observe the information given in the

Instructions for Use.

4.2.2 Replacing the Footrest

Remove the footrest holder. Loosen and remove the lower set screw on the inside of the swivel

segment (Fig. 27).

Loosen the upper set screw until the footrest bar can be moved (Fig. 28). Then pull the footrest

bar downwards out of the swivel segment.

Replace the footrest. For assembly, please proceed in reverse order.

1 2 ... 10 11 12 13 14 15 16 17 18 19 20 ... 43 44

No comments

Motus M770EL Service Manual Page 15